SINLOIHI Pigment Dispersion SW- Series is a new type of fluorescent pigments dispersion in water of sub-micron pigments particles and superior light-fastness, and is completely different from fluorescent pigment dispersion composed of resin of formaldehyde condensation. The SW-Series can be applied for various kinds of printing　processes such as roll printing, automatic screen printing, hand screen printing etc. as well as padding process and garment dyeing. SW- Series has been supplied as SW-10 Series, which is already eco-friendly since SW-Series was developed many years ago. Recently SW-100 Series is developed, in controlling the remaining monomer, in response to the strong requirement for more safe and eco-friendly products in different industries.

Major properties of SW-Series
1. Formaldehyde Free
SW-Series is composed of different type of resin than formaldehyde and does not generate formaldehyde.

2. Superior Workability
SW-Series does not contain coarse particle size because the average particle size is below 1.0μm and it is so no troubles such as clogging in screen mesh of plate cylinder and mottling in printing etc.,.

3. Superior resistance to heat
SW-Series is stable against heat due to the resin used in these pigments. This property allows rapid curing at higher temperature than with conventional fluorescent pigments.

4. Superior light-fastness
SW-Series has a light fastness of Class 4 on the Wool scale so that fluorescent pigments may be use to produce a beautifully designed pattern.

5. Less remaining monomer content
SW-100 Series is designed to be have less remaining Monomer like acrylonitrile & styrene in the production process.

(The detailed information is available in the technical leaflet of SW-Series, which may be submitted upon request.)

The various data in this leaflet are based on information we believe to be correct.
They are offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. We recommend that prospective users determine the suitability of our materials and suggestions before adopting them on commercial bases.